Scientists look to synthetic biology and 3-D printing for life support in space

24
Scientists look to synthetic biology and 3-D printing for life support in space



As NASA, The National Aeronautics and Space Administration gears up to send humans back to the moon or even to Mars, they’ll need to figure out how to keep these humans healthy and safe, far away from the resource-abundant Earth.

It won’t be feasible to pack everything they may need over the course of the mission, and resupply missions like those that keep the International Space Station (ISS) stocked will be prohibitively expensive and lengthy.

What these astronauts can pack are Earth’s unique renewable resource: cells. Cells of fungi and bacteria, for example, can be reprogrammed with synthetic DNA to produce specific materials, like bioplastics. These materials can then be fed into 3-D printers to manufacture things the astronauts may need during spaceflight — everything from hardware and medical devices to medicine and food.

In an opinion piece published online in Trends in Biotechnology, researchers from the Universities Space Research Association (USRA), MIT Lincoln Laboratory, and NASA, The National Aeronautics and Space Administration outline ways that synthetic biology and 3-D printing can support life during deep-space human missions. But to make these ideas a reality, NASA, The National Aeronautics and Space Administration is seeking help.

“Our opinion piece is a call to action to get DIY [do-it-yourself] biology and makerspace communities involved,” says Peter Carr, who works in Lincoln Laboratory’s Bioengineering Systems and Technologies Group. The DIY biology community makes it possible for anyone in the public with an interest to conduct biological engineering. The community operates outside the traditional academic or industry settings and spreads knowledge through open sourcing. Many DIY biologist groups operate makerspaces that provide equipment and supplies for members to do experiments on their own.

“These separate, eclectic communities do bio in unconventional settings all the time and are pioneers at rapid prototyping and developing technologies with limited resources. There are parallels here with space and the needs of NASA, The National Aeronautics and Space Administration crews,” Carr says. “But this also requires organizations like ours and NASA, The National Aeronautics and Space Administration to connect more deeply with them in a two-way process, so there’s a real pathway to getting people’s work into space. We’re just getting started.”

3-D printers are common staples of makerspaces. Experiments done on the ISS with 3-D printers have proven their utility for manufacturing on-demand items, like replacement hardware. But if 3-D printing is to be a reliable tool for long-duration missions in space, a new problem crops up: the need to supply the ship with the feedstock for the printers.

To meet this need, the authors envision using synthetic biology to produce custom biological “ink” to 3-D print whatever may be needed over the course of a mission. Such a process might give scientists “the autonomy to design for the unknown,” says Jessica Snyder, a USRA researcher who leads the synthetic biology task for the NASA, The National Aeronautics and Space Administration Academic Mission Services.

Living organisms can convert sunlight, nitrogen, and water into finished products. Bioengineers can reprogram the inner logic of these organisms’ cells to produce target compounds. The building blocks to edit these cells can be digitized and sent to the space crew in the form of a DNA sequence, which can be synthesized, assembled, and inserted into an organism on ship. “The idea is what we call a ‘bits-to-biology’ converter,” says David Walsh, a bioengineer at Lincoln Laboratory.

Here’s one example of how this vision can be implemented: Say that astronauts faced a situation that occurred on the ISS in 2007 — a solar panel has torn and needs a repair strap. On Earth, synthetic biologists, whether of the DIY type or not, design and test genetic programs instructing bacteria to produce the polymer feedstock for 3-D printing. (This work can also take place well before the need arises during the space mission.) The maker community works out the design of a strap from those materials. These genetic instructions and 3-D printing instructions are sent digitally from Earth to the space crew. The crew reproduces the genetic program, and the bacteria reproduce and synthesize the raw materials, which are used to 3-D print the strap. At the end of the product’s life cycle, the part is recovered and digested, and a new one can be made. 

“We have the power of digital information. We can design and work out all of the kinks on Earth and simply send the instructions to space,” Walsh says.

The same principles can be used to insert DNA into organisms in space to make target compounds for food or pharmaceuticals, which if brought directly from Earth might degrade over time from radiation in space. 

Astronauts might be able to conduct these complex biology experiments by using 3-D-printed microfluidic devices. These tiny “lab-on-a-chip” devices automatically control the flow and mixture of fluids through microchannels and use only trace amounts of chemicals to run hundreds of bioreactions in parallel in seconds. Genetic instructions might be sent directly to electronics controlling these microfluidic devices, enabling them to precisely follow the digital “recipe” to synthetize molecules of DNA. 

Earlier this year, Lynn Rothschild, a scientist at the NASA, The National Aeronautics and Space Administration Ames Research Center who co-authored the opinion piece, led a team that ran the first synthetic biology experiments in space. The experiments aimed to test how well bacteria in space take in synthetic DNA inserted into their genome and how well the bacteria produce proteins, while being spun to simulate microgravity (what astronauts in the ISS encounter), lunar gravity, and Martian gravity levels. The experiments took place on the PowerCell payload aboard the German satellite mission Eu:CROPIS (Euglena and Combined Regenerative Organic-Food Production in Space).

There is still a long way to go, however, both in experimenting with synthetic biology and figuring out all of the parameters that might make 3-D printing with biomaterials possible in space. “For example, bacteria will need water and will take up space; they need the right environment to live; and they’ll produce waste. We still need to put these ideas up against the real-world constraints,” Carr says.

But there’s urgency in developing the concepts now. If synthetic biology and 3-D printing techniques can be proven and practiced in time for missions close to Earth, from which supplies can still be sent relatively quickly, then they can be counted on for a long-term mission to Mars.

“Flexible manufacturing techniques provide an excellent complement to Earth-based supply chains for destinations days away, like the International Space Station and possible lunar infrastructure, for examples. Let’s take advantage of this redundancy to build an in-space manufacturing capacity to take us further into space more safely,” Snyder says. Do-it-yourself biologists and makers can help today by publishing their designs for 3-D-printed products, microfluidic devices, or synthetic DNA on open-source repositories and by testing and editing published designs. “If DIY bio communities use, iteratively improve, and ultimately approve of a technique, then that technique has been optimized more robustly than most individuals or team can offer without great effort. Partnering with these communities is an invaluable asset,” Snyder adds. People who are interested can also see NASA, The National Aeronautics and Space Administration’s Centennial Challenges, which outline problems that NASA, The National Aeronautics and Space Administration is seeking the public’s help to solve. 

“We often hear about the engineer who was inspired by NASA, The National Aeronautics and Space Administration in their youth and works there now. But what about the bio people who are inspired by these grand ideas? How can they contribute? Now is a chance to transition their ideas to space,” Carr says. “There is so much opportunity to innovate.”


Disasters Expo USA, is proud to be supported by Inergency for their next upcoming edition on March 6th & 7th 2024!

The leading event mitigating the world’s most costly disasters is returning to the Miami Beach

Convention Center and we want you to join us at the industry’s central platform for emergency management professionals.
Disasters Expo USA is proud to provide a central platform for the industry to connect and
engage with the industry’s leading professionals to better prepare, protect, prevent, respond
and recover from the disasters of today.
Hosting a dedicated platform for the convergence of disaster risk reduction, the keynote line up for Disasters Expo USA 2024 will provide an insight into successful case studies and
programs to accurately prepare for disasters. Featuring sessions from the likes of The Federal Emergency Management Agency,
NASA, The National Aeronautics and Space Administration, NOAA, The National Oceanic and Atmospheric Administration, TSA and several more this event is certainly providing you with the knowledge
required to prepare, respond and recover to disasters.
With over 50 hours worth of unmissable content, exciting new features such as their Disaster
Resilience Roundtable, Emergency Response Live, an Immersive Hurricane Simulation and
much more over just two days, you are guaranteed to gain an all-encompassing insight into
the industry to tackle the challenges of disasters.
By uniting global disaster risk management experts, well experienced emergency
responders and the leading innovators from the world, the event is the hub of the solutions
that provide attendees with tools that they can use to protect the communities and mitigate
the damage from disasters.
Tickets for the event are $119, but we have been given the promo code: HUGI100 that will
enable you to attend the event for FREE!

So don’t miss out and register today: https://shorturl.at/aikrW

And in case you missed it, here is our ultimate road trip playlist is the perfect mix of podcasts, and hidden gems that will keep you energized for the entire journey

-

This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Accept Read More