A Method for Mapping V2X Communication Requirements to Highly Automated and Autonomous Vehicle Functions
[ad_1]
1. Introduction
This article aims to systematically assess the requirements towards V2X input data to highly automated and autonomous systems that can individually or in combination with other sensors enable certain LoAs, defined by the Society of Automotive Engineers (SAE) International. The authors discuss regulatory challenges and the issue of scalability in the hybrid environments, where both V2X-capable and traditional vehicles are present on the roads, and map the V2X capabilities to the SAE levels of autonomy by taking into account the features that various protocols provide. A method is proposed for assessing the applicability of V2X at various levels of automation based on system complexity, and an example of the use of the method is provided on one of the common high level automation use-cases. This article is concluded with an outlook to non-automotive technical fields, where V2X-equivalent, IoT-based information is available, and may affect the operation of the automated systems.
2. State-of-the-Art V2X Technology
In recent years, V2X communication and development have faced several challenges. This paper does not aim to address the challenges of the underlying technology, rather it aims to focus on the implementation of new methodologies on automated driving use cases. However, some of these challenges are mentioned hereafter, serving as basis for further work and possible future development areas:
-
Interference and Signal Degradation: In urban environments with high-density traffic, buildings and other obstacles, the radio signals can suffer interference or degradation, leading to signal loss or reduced quality of communication [17].
-
Dynamic Network Topology: The network topology in V2X communication is highly dynamic due to the mobility of vehicles and changing environmental conditions. Maintaining reliable communication paths becomes challenging as vehicles move in and out of range or obstruct each other’s signals [18].
-
Latency and Delay: The time-sensitive nature of V2X applications, such as collision avoidance systems, requires low latency communication. However, delays in signal transmission or processing can occur due to network congestion, protocol overhead, or computational limitations in onboard systems, compromising reliability [19].
-
Scalability: As the number of connected vehicles increases, the scalability of communication systems becomes crucial. Ensuring reliable communication among a large number of vehicles while maintaining network efficiency and avoiding congestion is a significant challenge [20].
-
Security and Privacy: V2X communication involves the exchange of sensitive information related to vehicle location, speed and trajectory. Ensuring the security and privacy of these data against malicious attacks, such as spoofing, jamming, or eavesdropping, is essential for maintaining communication reliability and trust among the users [21].
-
Harsh Environmental Conditions: V2X communication must operate reliably under various environmental conditions, including adverse weather (e.g., heavy rain, snow), electromagnetic interference and physical obstructions. Adapting communication protocols and signal processing techniques to mitigate the impact of these conditions is necessary for maintaining reliability [22].
-
Quality of Service (QoS) Requirements: Different V2X applications may have varying QoS requirements in terms of reliability, latency and bandwidth. Ensuring that the communication system can meet these diverse requirements while optimizing resource utilization and network performance is a complex challenge [23].
2.1. Protocols of V2X Communication
2.1.1. DSRC Protocol
DSRC supports multiple communication modes to enable various types of V2X interactions, including:
-
Vehicle-to-Vehicle (V2V): communication between vehicles. It allows nearby vehicles to exchange safety-critical information, such as speed, location, acceleration and braking status, enabling cooperative maneuvers and collision avoidance.
-
Vehicle-to-Infrastructure (V2I): communication between vehicles and infrastructure components like traffic signals, roadside units, and toll booths. It enables the exchange of traffic-related data, such as signal phase and timing information, traffic conditions, and road hazards. V2I communication enhances traffic efficiency and supports applications like signal prioritization for emergency vehicles.
-
Vehicle-to-Pedestrian (V2P): communication between vehicles and pedestrians carrying DSRC-enabled devices. This communication mode enhances pedestrian safety by providing alerts to both the driver and the pedestrian in potentially hazardous situations.
Other, less common uses of V2X include, but not limited to:
-
Vehicle-to-Network (V2N): Involves communication between vehicles and the broader communication network, enabling access to cloud-based services, traffic information, and other centralized data sources.
-
Vehicle-to-Grid (V2G): Allows electric vehicles to communicate with the power grid, enabling bidirectional flow of energy. This can be utilized for vehicle charging, discharging excess energy back to the grid, and participating in demand response programs.
-
Vehicle-to-Cloud (V2C): Involves communication between vehicles and cloud-based platforms, enabling access to a wide range of services, including over-the-air updates, infotainment and personalized settings.
-
Vehicle-to-Home (V2H): Enables communication between vehicles and smart home systems, allowing the integration of electric vehicles with home energy management for charging optimization and energy sharing.
-
Vehicle-to-Device (V2D): Involves communication between vehicles and other connected devices, such as smartphones or wearables, to enhance the overall connected experience and provide additional services.
DSRC has been extensively researched, tested and deployed in pilot programs and field trials worldwide. It has shown promising results in improving road safety, traffic efficiency, and enabling advanced V2X applications.
2.1.2. C-V2X Protocol
C-V2X utilizes the cellular network infrastructure to enable V2X communication. It operates in two modes: Direct Communication Mode (also known as PC5) and Network Communication Mode:
-
Direct Communication Mode (PC5): In this mode, vehicles directly communicate with each other and nearby infrastructure using a PC5 interface. PC5 stands for “sidelink” and refers to the direct short-range communication between vehicles and infrastructure components without relying on the cellular network. It operates in the 5.9 GHz frequency band, similar to DSRC, and provides low-latency and high-reliability communication. PC5 allows vehicles to exchange safety-critical messages and information such as location, speed, acceleration and other relevant data. It enables direct V2V, V2I and V2P communications [27].
-
Network Communication Mode: In this mode, C-V2X utilizes the cellular network infrastructure to enable wide-area communication and access cloud-based services. Vehicles can connect to the network through the cellular base stations and exchange information with other vehicles, infrastructure and centralized servers. Network communication mode allows for more extensive coverage and provides access to additional services, such as real-time traffic information, over-the-air software updates, and remote diagnostics. It enables vehicle-to-network and vehicle-to-cloud communications, expanding the capabilities of V2X applications [28].
3. Related Work
4. SAE Levels of Autonomy and V2X
SAE Levels of Autonomous Vehicles
-
LoA 0: No driving automation
The vehicle does not possess the capability to carry out any automated actions. However, it can still transmit warning signals to the human operator. This limitation underscores the crucial role of human oversight and decision-making in the operation of the vehicle. Despite advancements in automation and vehicle intelligence, the presence of a human operator remains essential to ensure safety and manage complex situations that may arise. By receiving warning signals, the human operator can stay informed about potential hazards or critical events, allowing them to intervene and take appropriate actions as necessary. The integration of warning systems with human–machine interfaces becomes crucial to effectively communicate critical information and enable timely responses for the human operator. Thus, while the vehicle lacks autonomous actuation abilities in these use-cases, it emphasizes the continuous importance of human involvement and situational awareness in ensuring safe and reliable vehicle operation.
-
LoA 1: Driver assistance
ADAS functionalities are enabled, primarily through automated control of either longitudinal (acceleration and deceleration) or lateral (steering) motions. However, it is important to note that the human operator is responsible for the overall control and operation of the vehicle. While the automated system assists in specific aspects of the driving task, such as maintaining a set speed or keeping the vehicle within its lane, the human operator retains the ultimate responsibility for monitoring the driving environment and making critical decisions.
-
LoA 2: Partial driving automation
The vehicle is empowered with the ability to be fully actuated by an autonomous system, enabling coordinated longitudinal and lateral control. The human operator remains actively engaged and responsible for overseeing the driving task. Their continuous involvement is essential to ensure a prompt and seamless transition of control when necessary. Nevertheless, the human operator’s active engagement is pivotal. They must be ready to intervene and resume control of the vehicle immediately if the autonomous system encounters limitations or fails to handle certain driving situations. Effective monitoring of the driving environment, awareness of system capabilities and limitations, and the ability to respond promptly to unexpected scenarios are crucial aspects of the human operator’s role in Level 2 automation.
-
LoA 3: Conditional automation
The dynamic driving task is primarily managed by the automated system. The human operator is actively supervising the system’s operation. The automated system possesses advanced capabilities for environment recognition, decision-making, and control, enabling it to handle the entire driving task under specific conditions. One of the critical challenges in LoA 3 automation is the handover of control between the automated system and the human operator. It ensures that the human operator is always sufficiently aware and engaged to take over control is crucial to avoid potential hazards or delays in critical situations. Human–machine interfaces, clear communication, and proper training are paramount to facilitate effective control transitions and maintain the overall safety of the driving experience.
-
LoA 4: High automation
It represents a significant advancement in autonomous driving. At this level, the dynamic driving task is jointly performed by the vehicle’s automated system, encompassing control, decision making, and environment recognition tasks. This joint performance is limited to a specific Operational Design Domain (ODD) defined by certain boundaries and conditions. In the event of a system malfunction or encountering tasks that exceed the system’s capabilities, the vehicle is equipped with mechanisms to transit to a safe state. This ensures that the vehicle can mitigate risks and respond appropriately in challenging or unpredictable situations.
-
LoA 5: Full automation
It signifies the highest level of autonomous driving capability, where the automated system autonomously manages all dynamic driving tasks across any operational design domain without the need for human intervention. At this level, the vehicle is fully self-driving, equipped with robust decision-making capabilities. It can navigate and adapt to a wide range of driving scenarios, including complex urban environments, highways, and challenging weather conditions.
5. V2X Technology in the Context of SAE Levels of Autonomy
The integration of V2X technology holds significant promise in advancing the capabilities of self-driving vehicles across the SAE levels. At levels where the human operator remains responsible, V2X can enhance driver assistance systems by providing real-time information about the road conditions, the traffic congestion, and the potential hazards, enabling the automated system to make more informed decisions. Complex ADAS systems can benefit from V2X in cooperative perception, allowing vehicles to exchange sensor data and collaborate in detecting and tracking objects. This can enhance the accuracy and the reliability of object recognition and improve the overall situational awareness of the automated system.
On the other hand, at higher levels of autonomy, V2X plays vital role in facilitating safe and efficient control transitions between the automated system and the human driver. Through communication with traffic infrastructure and other vehicles, V2X provides critical information to prepare the system and the driver for the handover of control. V2X is designed to enable highly cooperative and coordinated behaviors among self-driving vehicles. By sharing intentions, trajectories, and sensor data, V2X allows smooth merging, platooning, and intersection crossing, leading to improved traffic flow, reduced congestion, and enhanced safety.
5.1. Mapping of V2X Capabilities to the SAE Levels of Autonomy
In this paper, we propose a mapping of V2X capabilities to the SAE levels of autonomy by utilizing the features provided by communication protocols, integrated into automation levels.
-
LoA 0—No automation. At Level 0, V2X technology refers to the communication and exchange of information between vehicles and the surrounding infrastructure, including other vehicles, pedestrians, traffic signals and road infrastructure. It enables vehicles to share real-time data such as speed, position and intentions with other connected entities, allowing for enhanced situational awareness [46]. At this level, V2X technology plays a crucial role in providing important safety-related information to the human driver, e.g., warnings about hazardous road conditions, traffic congestion or the presence of emergency vehicles. By transmitting this information, both situational awareness and decision making capabilities are significantly improved.
-
LoA 1—Driver assistance. The human driver remains engaged and responsible for the driving task, V2X can augment the existing driver assistance features by enabling real-time communication between the vehicles, the infrastructure, and the other entities. In practice, this includes data on the speed and trajectory of nearby vehicles, enabling the automated system to maintain a safe distance and adapt the speed accordingly. At this level, V2X can support cooperative maneuvers and interactions between vehicles, such as cooperative merging or platooning. By exchanging information about trajectory or acceleration, the system can aid the human drivers to coordinate their movements more efficiently and smoothly.
-
LoA 2—Partial driving automation. V2X communication enables cooperative perception and motion control between the vehicles and the surrounding environment. At this level, the automated system assumes control over both longitudinal and lateral motions, where V2X facilitates the exchange of sensor data between the vehicles. By sharing information about their own sensor readings, such as radar, LIDAR or camera data, vehicles can collectively improve their perception of the surrounding environment, enhancing the object detection, the tracking and the situational awareness, allowing the system to engage in more complex driving scenarios. LoA 2+ systems can also benefit from communicating the intentions of maneuvering functions, such as lane changes, overtaking or merging, to nearby vehicles, enabling smoother and more coordinated movements. This cooperative behavior can enhance safety, reduce the risk of collisions and optimize traffic flow.
-
LoA 3—Conditional automation. The automated system is responsible for controlling the vehicle and executing the driving task under certain conditions, while the human driver acts as a fallback and is required to intervene when prompted by the system. At this level, vehicle requires data from traffic infrastructure, such as the traffic lights or the road signs, and the other connected entities, including other vehicles and pedestrians, which are traditionally provided by the onboard sensor system. This information can assist the automated system in making informed decisions, adjusting its behavior and enhance the overall situational awareness of the automated system by providing advanced warnings and alerts. V2X communication can support the seamless transition of control between the automated system and the human driver. In case conditions exceed the capabilities of the automated system or require human intervention in the given ODD, V2X technology can facilitate the handover process.
-
LoA 4—High automation. The automated system is capable of performing all dynamic driving tasks within a specific ODD without requiring human intervention. V2X technology contributes to this high automation level by facilitating the exchange of critical information between the vehicles and the infrastructure, enabling them to share real-time data about intentions, trajectories and sensor readings. This cooperative data sharing allows vehicles to have a comprehensive understanding of complex traffic scenarios. At this level, V2X technology contributes to safety and efficiency by enabling vehicles to communicate their ODDs and operational constraints. Through V2X, vehicles can broadcast their intended paths and driving behaviors to others, allowing for optimized route planning and avoidance of conflicts. This cooperative coordination can prevent potential collisions, enhance the traffic predictability, and improve the overall system performance. By integrating this information into their decision-making processes, autonomous vehicles can adapt their driving strategies accordingly and navigate safely within their designated ODDs.
-
LoA 5—Full automation. V2X technology is expected to be an essential component in achieving Level 5 self-driving, where the vehicles are fully autonomous and capable of performing all dynamic driving tasks across all operational design domains without any human intervention. V2X enables seamless communication and coordination among the vehicles, the infrastructure and the other entities, therefore the autonomous systems are provided with comprehensive understanding of the surrounding environment and the behaviors of the other entities. By leveraging V2X capabilities, the autonomous vehicles can make highly informed decisions, optimize their routes, and navigate safely and efficiently in complex traffic scenarios. Through V2X communication, the vehicles can negotiate right-of-way, engage in cooperative merging and lane changes, and coordinate their speeds to maintain safe and efficient traffic flow. This cooperative interaction is crucial in creating a harmonious and predictable driving environment. V2X communication enhances the overall safety of Level 5 self-driving by providing advanced warnings and alerts. The vehicles can exchange information about potential hazards, road conditions, and unexpected events. This real-time information can be integrated into the decision-making processes of the autonomous vehicles, allowing them to proactively respond to changing situations and avoid potential collisions.
5.2. A Method for Assessing the Applicability of V2X at Various Levels of Automation
-
Smart infrastructure—the contribution to the dynamic driving task based on information from the static and dynamic environment;
-
Driving strategy—long- and short term trajectory and path planning and navigation;
-
Decision making—high-level driving logic behind the automated driving function;
-
Collaborative driving—actuation commands and warning signals based on information sharing between the vehicles;
-
Driver support—driver assistance in actuation and decision making, provided that control remains in the hands of the driver;
-
Driver warning—information sharing about the environment and the status of the vehicle with the purpose of early warning.
Table 1.
Applicability of V2X at various levels of automation based on system complexity. At lower levels of automation, the contribution of V2X technology manifests in driver assistance and raising situational awareness. As the contribution of the human driver decreases at higher levels beyond driver assistance, the focus of information sharing between the vehicle and the environment shifts towards more complex automated functionalities. Table legend: ✓ Applicable ★ Optional ✗ Not applicable.
Table 1.
Applicability of V2X at various levels of automation based on system complexity. At lower levels of automation, the contribution of V2X technology manifests in driver assistance and raising situational awareness. As the contribution of the human driver decreases at higher levels beyond driver assistance, the focus of information sharing between the vehicle and the environment shifts towards more complex automated functionalities. Table legend: ✓ Applicable ★ Optional ✗ Not applicable.
Level 0 | Level 1 | Level 2 | Level 3 | Level 4 | Level 5 | |
No Automation | Driver assistance | Partial driving automation | Conditional automation | High automation | Full automation | |
Smart infrastructure | ✗ | ✗ | ✗ | ✗ | ✓ | ✓ |
Driving strategy | ✗ | ✗ | ✗ | ★ | ✓ | ✓ |
Decision making | ✗ | ✗ | ★ | ✓ | ✓ | ✓ |
Collaborative driving | ✗ | ★ | ✓ | ✓ | ✓ | ✓ |
Driver support | ✗ | ✓ | ✓ | ✗ | ✗ | ✗ |
Driver warning | ✓ | ✓ | ✓ | ✓ | ★ | ✗ |
5.3. V2X Aided Use Cases of Automated Driving
Vulnerable Road User (VRU) protection has also gained attention lately. Autotalks, in collaboration with Volkswagen, Bosch eBike Systems and Commsignia, are set to showcase the capabilities of V2X communication in preventing bike-vehicle collisions. The demonstration, taking place at the SECUR Final Event near Paris, focuses on an obstructed intersection scenario where a car or eBike’s vision is blocked. Using Autotalks’ V2X technology integrated by Bosch eBike Systems and Commsignia software, a V2X-enabled bicycle will communicate with a VW vehicle to alert it on its presence, mitigating potential crashes at the intersection. This collaboration aims to enhance cyclists’ safety and improve the integration of eBikes into future V2X communication. The SECUR project, an industrial consortium focused on V2X testing and assessment protocols for Euro NCAP, supports this initiative to leverage V2X technology for the safety of vulnerable road users, promoting cyclists’ confidence and protection at intersections.
6. Case Study: Application of the Method on LoA 4 Valet Parking with V2X
In this section, we present a case study (automated valet parking) on the alignment the V2X capabilities with the SAE levels of autonomy, considering the features offered by various protocols. According to the proposed method, the investigated areas of interest can be mapped to the function to the extent of the function’s level of automation according to SAE, carried our from the automated driving point of view. AVP is categorized as an LoA 4 function, as the ODD is limited to the parking lot or garage, however, the driver is not needed for the operation of the vehicle. AVP is also a special case of LoA 4 driving, as the physical presence of the driver in the vehicle is not required. The mapping of the function’s requirements, components and challenges is done for the 6 areas of interest as follows.
6.1. Smart Infrastructure—AVP
Infrastructure in AVP covers both the parking lot or garage, where the maneuvering takes place and the section of the infrastructure that connects the parking area with the public road, where the function is activated. This includes any ramp, gate, parking bay or the section of the public road, where the LoA 4 function may be active.
For AVP, one of the most crucial V2X requirements is a the availability of local HD or feature maps, specific to the parking garage, provided in an appropriate format and available for storage on the vehicle. This is considered a static information and serves as a base for global trajectory planning. This information is completed with dynamic data from the infrastructure, which includes the list and location of free parking spots, any moving vehicle within the ODD and other information on the environment, such as temperature or humidity.
6.2. Driving Strategy—AVP
The driving strategy in AVP includes the global path planning from the entrance of the parking garage to the selected parking slot, the latter requiring V2X connection to the most up-to-date status of the available slots; the strategy also addresses the local path planning, which is defined in the vicinity of the final parking position, virtually blocking the path for other, simultaneously moving vehicles. Trajectory planning and execution requires precise localization from the vehicle, which can be done either by triangulation the position of the vehicle using locator sensor or using the AD sensor set for the execution of SLAM or other localization methods based on prior knowledge of the map of the infrastructure. Cloud-based computation is also possible for driving strategy, which requires the communication of the vehicle parameters and status to the central computing unit.
6.3. Decision Making—AVP
Decision making is one of the key elements of LoA 4–5 automated driving, which is particularly challenging in mixed—AD and non-AD—environments. In the case of fully automated AVP scenarios (no human driver are allowed), V2X serves as the interface for the swarm intelligence of active self-driving vehicles in the parking garage, transferring information back and forth between the actuators and a cloud-based computing unit to find the optimal planning and execution of the parking maneuver. This requires a low-latency, high bandwidth communication protocol to avoid delays and potential damage. In mixed environments, the decision making process is more complex, as the cloud-based system is not aware of the intention of human drivers, therefore more attention is given to the sensors mounted on the vehicles. In this case, the central computing unit relies on information transmitted from V2X-capable vehicles and static sensors mounted on the garage to estimate the intention and plan accordingly for human-operated vehicles.
6.4. Collaborative Driving—AVP
Collaborative driving in AVP is possible both by V2I and V2V communication, noting that the former approach may partially or fully fall into the area of decision making. However, collaboration is also possible on the V2V level by sharing sensor data and aiding local trajectory planning or evasion maneuvers, offloading the bandwidth load on the communication between the actors and the infrastructure. The information shared this way may include raw sensor data, (processed) information of the 3D environment, driving intentions, emergency status or other non-driving related information, such as outdoor conditions. Collaborative driving also helps the local solution of deadlock situations and facilitates the optimal use of parking slots in terms of fuel efficiency, time and other factors.
6.5. Driver Support—AVP
In LoA 4 AVP mode a vehicle is not providing driver support, as the system is capable (and required) to operate fully autonomously in the ODD, ideally without the presence of the human driver. In this case, driver support does not need to be implemented for AVP in the scope of V2X technologies.
6.6. Driver Warning—AVP
Driver warning may be chosen optionally for AVP in the scope of V2X, depending on the implementation of the functionality. In case LoA 4 AVP for any reason requires human presence in the vehicle during the maneuver, the system is required to inform and/or warn the driver on the current status of the parking maneuver through the infotainment system or other communication channels. This is not a critical element of the LoA 4 functionality, but may be a regulatory or safety requirement of the local government to be fulfilled. Driver warning may still be required if the human operator is not present in the vehicle. In these cases, the communication is done via notification messages, either about a successful/unsuccessful parking, or hazards in the garage or regarding the vehicle. This function requires the capability of the vehicle and the infrastructure to recognize these situations, assess their severity and send information to the human operator.
7. Sustainability of V2X Technology
One key aspect of V2X technology is its potential to improve traffic flow and reduce congestion. With real-time communication, the vehicles can share information about the traffic conditions, the road hazards and the optimal routes. This facilitates smoother traffic management and reduces unnecessary idling, resulting in lower fuel consumption, reduced greenhouse gas emissions and improved air quality. V2X technology also supports eco-driving practices by providing the drivers with information on the optimal acceleration, deceleration, and speed adjustments to maximize the fuel efficiency. By promoting eco-friendly driving behaviors, V2X contributes to reduced fuel consumption and lower carbon dioxide emissions.
8. Outlook to Related Fields
While the integration of V2X and IoT technologies in these non-automotive fields holds great promise, several challenges need to be addressed. These include ensuring the security and privacy of sensitive medical data in robotic surgery, as well as establishing robust communication protocols and standards for eVTOL aircraft operations. By addressing these challenges and leveraging the potential of V2X-equivalent, IoT-based information, the fields of robotic surgery and eVTOL transportation can witness transformative advancements, leading to improved healthcare outcomes and revolutionizing the urban air mobility.
9. Discussion
V2X technology is expected to be equipped in all new vehicles by the end of the 2020s, supporting automated driving and safety features. However, it is not considered the sole technology enabling highly automated operation, but rather a safety-redundant component of the automated driving systems. V2X technology acts as an extra set of sensors, influencing the automotive development processes and operational domains. ISO 26262 standardizes the safety integrity of automotive systems, including automated driving, with different Automotive Safety Integrity Levels. While the vehicles produced since 2023 do not rely solely on V2X communication for driving functions, its assessment and integration into the system can enhance the environmental modeling, the decision-making and the actuation in automated driving. This paper explores the requirements, the regulatory challenges, the scalability and the potential impacts of V2X in highly automated and autonomous systems, along with its relevance in non-automotive fields with similar IoT-based information.
The integration of V2X technology in self-driving vehicles shows great potential for enhancing their capabilities across different levels of autonomy. At lower levels, V2X enables improved driver assistance systems by providing real-time information about the road conditions and the potential hazards. It also facilitates the cooperative perception, where vehicles exchange sensor data to enhance the object recognition and the situational awareness. At higher levels of autonomy, V2X plays a vital role in enabling safe control transitions between the automated systems the and human drivers. It allows the vehicles to communicate intentions, trajectories and sensor data, leading to coordinated behaviors such as merging and platooning, which enhance traffic flow and safety. V2X is crucial for achieving high levels of automation by facilitating critical information exchange between the vehicles and the infrastructure, optimizing the routes and avoiding collisions. Various use cases, including automated valet parking, cooperative platooning and intersection control, demonstrate the practical application of V2X technology in the autonomous driving.
10. Conclusions
The authors proposed a methodology to map the elements and focus areas of V2X technology in the scope of the automated driving, connecting the requirements to the functionalities of the highly automated driving system. The use case of the automated valet parking was presented as an application of the technology, where the mapping of the crucial aspects of the automated driving use case to the functionalities of the LoA 4 system were systematically reviewed, collected and summarized. The application of such methodology may provide an input for industrial design and production of the automated vehicles relying on V2X technology, adhering to the strict automated driving design and implementation standards of the automotive industry.
Literature research showed that while numerous works have discussed the current challenges and opportunities of the V2X technology itself, the domain of the applicability and methodical design of automated driving systems incorporating V2X technology has remained largely unexplored, indicating a significant gap in the existing body of literature. This study contributes novel insights into this relatively unaddressed area, providing special focus on the practical implementation and design considerations of automated driving systems leveraging V2X technology.
It was also shown that while sustainability, scalability, cyber-security and interoperability were arguably the key factors in the standalone development of V2X technology for the future of autonomy, automotive production standards and safety integration levels require a systematic process to system design, approaching key V2X fields from the point of view of the driving function realized on the vehicle, based on its level of autonomy.
Our future work includes the exploration of several important aspects to further advance the field of V2X communication. Possible directions include the development of standardized communication protocols and infrastructure requirements to ensure seamless interoperability among different V2X-enabled vehicles and infrastructure. Additionally, the integration of advanced machine learning and artificial intelligence techniques offers vast possibilities to enhance the performance and decision-making capabilities of V2X-enabled automated systems. The cyber-security challenges of the near future also require robust solutions to protect V2X communication from potential security threats, while exploring the social and legal implications of widespread V2X implementation, including ethical considerations, privacy concerns, and regulatory framework. All these directions provide a wide spectrum of research topics that can benefit from the foundations of this paper.
[ad_2]